近五年代表性学术论文、专著 |
1.Wang Shouren; Wang Gaoqi; Yang Xuefeng; Wang Yanjun; QIAO Yang; Liying Yang, Evaluation of thermal shock resistance of BNNTs/Si3N4composites based on first heat shock factor, Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2017.07.21 , 34(7)：1575~1581, EI, 2.Shouren Wang; Gaoqi Wang; Daosheng Wen; Xuefeng Yang; Liying Yang; Peiquan Guo, Mechanical Properties and Thermal Shock Resistance Analysis of BNNT/Si3N4 Composites, Applied Composites Materials, 201 7.6.12 , (7)：1~9, SCIE, 3.Shouren Wang; Daosheng Wen; Gaoqi Wang; Liying Yang; Peiquan Guo; Yang Qiao, Multitudinous industrialized fabrication of BNNT with high energy ball milling and arc-discharge aided template methods, Journ al of Nanoparticle Research, 2017.4.17 , (19)：352~358, SCIE, 4.TANG Yipin; WANG Shouren; SUN Bin; WANG Yan; QIAO Yang, Fabrication and wear behavior analysis on AlCrFeNi high entropy alloy coating under dry sliding and oil lubrication test conditions, Surface Review and Letters, 2016.3.10 , 23(4)：16500181~165001812, SCIE, 5.Wenjuan Ge; BoWu; Shouren Wang; Shuai Xu; Caiyun Shang; Zitang Zhang; Yan Wang, Characterization and properties of CuZrAlTiNi high entropy alloy coating obtained by mechanical alloying and vacuum hot pressing sintering, Advanced Powder Technology, 2017.4.30 , (28)：2556~2563, SCIE 6.Daosheng Wen; Debin Shan; Shouren Wang; Yingying Zong, Investigation of hydrogen influencing γ-phase true and pseudo twinning in a TiAl based alloy during high-temperature plane strain compression, Materials Science & Engineering A, 2017.11.3 , (710)：374~384, SCIE 7.Sicheng Zhai; Eugen Axinte; Shouren Wang; Wen Wang; Qi Xing; Yan Wang(*), Effects of pre-compression on the microstructure, mechanical properties and corrosion resistance of Cu47.5Zr47.5Al5 bulk metallic glasses, Journal of Non-Crystalline Solids, 2017.11.10 , (481)：383~390, SCIE 8.Yang, Xuefeng; Wang, Ziran; Song, Peilong; Wang, Shouren; Wang, Yanjun; Mao, Ken Laminated structure optimization and drawing performance of Al2O3-TiC/Al2O3-TiC-CaF2 self-lubricating laminated ceramic conical die Ceramics International 2015.11 9.Yang Xuefeng; Ze Xiangbo; Wang Hongyan; Wang Hui, Wear properties, and microstructures of alumina matrix composite ceramics used for drawing dies, Ceramics International 2009 35(8) 10.Xuefeng Yang ; Ziran Wang; Peilong Song; Jian Chen; JIE GU; TAO MA, Dry Sliding Wear Behavior of Al2O3-TiC Ceramic Composites Added with Solid Lubricant CaF2 by Cold Pressing and Sintering Tribology Transactions 2015.2.5,231~239 58(2) 11.Yang, Xuefeng ; Cheng, Jian; Song, Peilong; Wang, Shouren; Yang, Liying; Wang, Yanjun; Mao, Ken Wear Behavior of Cold Pressed and Sintered, Al2O3/TiC/CaF2-Al2O3/TiC Laminated Ceramic Composite Acta Metallurgica Sinica-English Letters 2013.4.20 26(2) 12.Yang Xuefeng; Wang Shouren; Yang Liying; Wang Yanjun; Zhang Bing; Song Peilong Research on the Wear Behaviors of WC-8Co and Al2O3-TiC Conical,876~882 Dies Journal of Inorganic Materials 2012.8 27(8) 13.Li Ying-jun, Wang Gui-cong, Yang Xue, Zhang Hui, Han Bin-bin, Zhang Yong-liang. Research on static decoupling algorithm for piezoelectric six axis force/torque sensor based on LSSVR fusion algorithm. Mechanical Systems and Signal Processing, 2018, 110:509-520. 14.Cheng Wang, Shouren Wang, Bo Yang, Gaoqi Wang, Dynamic modeling of double helical gears, Journal of Vibration and Control, 24(17):3989-3999, 2018. 15.Cheng Wang, Shou-ren Wang, Gao-qi Wang, A method for calculating gear meshing efficiency by measured data from gear test machine, Measurement, 119: 97-101, 2018. 16.Cheng Wang, Huan Yong Cui, Qing Ping Zhang, Wen Ming Wang, Modified optimization and experimental investigation of transmission error, vibration and noise for double helical gears, Journal of Vibration and Control, 22(1):108–120, 2016. 17.chen hongtang，Simulation and experimental validation of residual stress and surface roughness of high manganese steel after shot peening，Procedia CIRP，71：227-231，2018. 18.chen hongtang，Surface roughness and surface residual stress of high manganese steel after different shot peening processes，48th International Conference on Computers and Industrial Engineering, CIE 2018 19.chen hongtang，Study on path planning and compensation of off-line programming for thick walled curve welding，China welding，24（4）：69-73，2015 20.Xuan Sun, Xianpeng Sun , Chenglong Tang , Honghua Zhao and Changsheng Ai，Research on the Visual Processing System of the Punch Press，4th International Conference on Mechanics and Mechatronics Research 2016,Chengdu, P.R.China，2016， 21.Xuan Sun, Guangzhen Wang, Quancheng Dong,Yuzhong Li,Study on the Automatic Detection Method and System of Multifunctional Hydrocephalus Shunt, 4th International Conference on Mechanics and Mechatronics Research 2017, Xi’an, P.R. China,2017. 22.Yang Qiao, Ning Fan, Yong Yu, Peiquan Guo, Experimental Investigation on Turning of Double Metal Composite with Network Interpenetrating Structure, Materials and Manufacturing Processes, Taylor & Francis Group, 31(5): 653-656, 2016 23.Yang Qiao, Ning Fan, Peiquan Guo, Yang Bai, Shouren Wang, Surface integrity analysis in turning A03190/304 composites with network reinforcement, Engineering Science and Technology, an International Journal, Elsevier B.V, 19(4): 1966-1970, 2016 24.Xiangyu Wang, Long Yang, Yang Qiao*, Peiquan Guo, Shouren Wang, Cutting Characteristics and Surface Integrity in Drilling of Powder Metallurgy Nickel-based Superalloy FGH97, Procedia CIRP, Elsevier B.V, 71: 370-373, 2018 25.Yang Qiao, Peiquan Guo, Hongtang Chen, Shouren Wang，Tonghui Liu，Roughness Prediction Model of Face Milling Surface for Nickel-Based Superalloy FGH97，Materials Science and Engineering, IOP Publishing, 562:956-961, 2019 26.Yang Qiao, Peiquan Guo, Hongtang Chen, Shouren Wang, Hui Wang, Investigation of Machined Surface Properties and Tool Wear for Drilling of Nickel-Based Superalloy FGH97, Materials Science and Engineering, IOP Publishing, 562:890-896, 2019 27.Yang Qiao, Peiquan Guo, Hongtang Chen, Shouren Wang, Hui Wang, Chip Deformation Mechanism during Drilling of Nickel-based Superalloy FGH97，Materials Science and Engineering, IOP Publishing, 484:99-102, 2018 28.Yang Qiao, Shouren Wang, Peiquan Guo, Xuefeng Yang，Yanan Wang，Experimental research on surface roughness of milling medical magnesium alloy, Materials Science and Engineering, IOP Publishing, 397:736-742, 2018 29.Yang Qiao, Peiquan Guo, Shouren Wang, Xuefeng Yang, Experimental study on residual stress of milling medical magnesium alloy, Materials Science and Engineering, IOP Publishing, 397:295-300, 2018 30.Qiao Yang, Yang Long, Wang Shouren, Guo Peiquan, Wang Yanan, Research on Preparation and Extrusion Process of Magnesium Calcium Alloy, IOP Publishing, 389:1-7, 2018
|
